How to use the UV germicidal lamp correctly?
The ultraviolet germicidal lamp emits ultraviolet rays through the lamp tube, so as to achieve the purpose of sterilization and disinfection. Nowadays, the application prospects of ultraviolet germicidal lamps are very broad, and they have been widely used in the public field and even in the industrial production field. However, if UV sterilization is used improperly, it will also cause certain harm to the human body. How to use the UV germicidal lamp correctly?
Ultraviolet germicidal lamps are usually used by manufacturers for the sterilization of the surface of objects in industrial production. When the germicidal lamp irradiates the surface of the object at close range, the bacteria on the surface of the object will absorb the emitted ultraviolet rays and become inactive, so as to achieve The purpose of industrial sterilization. In the installation process of ultraviolet germicidal lamps, there are also some matters needing attention. In the process of using it, it is necessary to pay attention to the existence of no staff in the entire working space, so as to avoid the direct exposure of ultraviolet rays to the human body, causing ultraviolet rays to burn the skin and cause related diseases. And before the staff performs its related operations, they should carry out certain safety training, inform them of certain work skills and precautions, and tell the staff not to look directly at the germicidal lamp, otherwise it will cause burns to the eyes and damage to the cornea. This leads to disease and reduces accidents.
In the whole disinfection process, it is best to irradiate for more than 30 minutes, so as to achieve the purpose of effective sterilization and disinfection. During the entire sterilization process, it should also be noted that the surface of the germicidal lamp is in a clean state to reduce the stains and water vapor on the surface, and the corresponding indicators of ultraviolet rays cannot be achieved, so that the purpose of sterilization cannot be achieved. And after the sterilization work in the space is over, the windows should be opened for ventilation, and the entire ventilation time should last for more than 25 minutes.
The above are the matters needing attention in the working process of the ultraviolet germicidal lamp. Before introducing it, enterprises should do the corresponding homework to avoid the situation of personal burns.
